Types of Fasteners

All the options to meet virtually any need.

With PneuScrew® pneumatic fasteners, you can easily meet the needs of any market or individual customer. They’re available in Phillips head, #2 square head and star drive, and in plastic strip, wire coil or plastic sheet coil. Within these options, there are multiple coatings and sizes available (1-1/2 to 3 inches long). They can match the color, appearance, and purpose of a variety of projects.

Plastic Strip

Plastic Strip

21-Degree Plastic Strip

Flat head - yellow zinc coated. For subfloor, sheathing and roof decking. Not for exposed exterior use. Compatible with most 20-22-degree plastic strip pneumatic framing nailers.

  • 1-3/4" x 0.120 #2 square drive, yellow zinc coated
  • 2" x 0.131 #2 square drive, yellow zinc coated
  • 2-1/4" x 0.113 #2 Phillips drive, yellow zinc coated*
  • 2-1/2" x 0.120 #2 square drive, yellow zinc coated
  • 3" x 0.113 #2 Phillips drive, yellow zinc coated*

Flat head with gray PPG1500™ coating for treated lumber - decks and docks.

  • 2-1/2" x 0.113 #2 Phillips drive, gray
  • 3" x 0.113 #2 Phillips drive, gray

Colored heads for treated lumber and other outdoor wood projects.

  • 2-1/4" x 0.120 #2 square drive, gray

Stainless steel for decks, docks and treated lumber - use near salt water.

  • 2-1/2" x 0.120 #2 square drive, SS
  • 3" x 0.120 T-15 star drive, SS
Wire Coil

Wire Coil

15-Degree Wire Coil

Flat head – yellow zinc coated. Not for exposed exterior use. Compatible with most 15-degree wire coil pneumatic framing nailers.

  • 2-1/4" x 0.113 #2 Phillips drive, yellow zinc coated*
  • 2-1/2" x 0.113 #2 Phillips drive, yellow zinc coated*
  • 3" x 0.120 #2 square drive, yellow zinc coated

Flat head zinc-nickel alloy coated for decks, docks and treated lumber.

  • 2-1/2" x 0.113 #2 square drive, zinc/nickel
  • 3" x 0.113 #2 square drive, zinc/nickel

Stainless steel for decks, docks, treated lumber and softer composites - use near salt water.

  • 3" x 0.120 T-15 star drive, SS
Plastic Sheet Coil

Plastic Sheet Coil

15-Degree Plastic Sheet Coil

Flat head yellow zinc coated for metal applications (12-20 gauge), crating. Compatible with most 15-degree plastic sheet coil pneumatic framing nailers.

  • 1-1/2" x 0.113 #2 Phillips drive, yellow zinc coated

Combo trim head PPG1500™ coated - composite and wood fencing

  • 1-1/2" x 0.113 T-15 star drive, tan

*Covered by IAPMO-ES evaluation report number 0133 as a substitution for nails in horizontal and vertical shear walls.